S&B Filters' Warranty Policy:
All applicable S&B products are emissions-tested and certified in 50 states and are backed by our warranty policy which is outlined below.
Million Mile Warranty
All S&B OEM replacement air filters and intake kits are covered under the warranty for
defective materials or workmanship for one million miles. The million mile warranty is
limited to S&B branded OEM replacement filters and intake kits. If for any reason your
high performance filter should fail due to workmanship or defective materials, the original
consumer who purchased the S&B Air Filter or Intake Kit must simply provide proof of
purchase to be eligible for the warranty. In order to maintain the S&B warranty, you must
use the S&B Precision Cleaning & Oiling Kit (part # 88-0005 or 88-0007) to service the
filter. Furthermore, the filter must be serviced according to the directions included with
part numbers 88-0005 or 88-0007.
Warranty Conditions
Product returned for warranty resolution must be accompanied by a Return Material
Authorization (RMA) number obtained in advance from an S&B customer service representative.
S&B will be the final authority on all warranty decisions.
The original consumer who purchased the S&B product must also provide proof of purchase to be
eligible for the warranty. Those S&B products used in any type of racing or for off-road use are
not covered by the warranty. S&B products that are modified or that are used on custom applications
are also not covered. Products made and/or sold by S&B on a private label basis are also not
covered by the warranty.
This warranty shall not apply to any unit which has been improperly stored or installed; subjected
to misapplication, improper operating conditions, accidents, or neglect; or which has been
improperly repaired or altered or otherwise mistreated by the owner or his agent.
Warranty Coverage
S&B Filters, Inc. (S&B) warrants to the original purchaser that any parts purchased shall
be free from defects in material and workmanship. A defect is defined as a condition that would
render the product inoperable. This warranty does not cover deterioration of plating, paint or
any other coating. S&B's liability is limited to the repair or replacement, at S&B's
option, of any warrantable product returned prepaid with a complete service history and proof
of purchase to the factory. A valid proof of purchase is a dated bill of sale. Repaired or
replaced product will be returned to the customer freight collect. Accepted warranty units
which have been replaced become the sole property of S&B. Mileage is not a factor.
All S&B products are subject to the provisions stated herein regardless of mileage.
Except as set forth in this warranty, S&B disclaims any implied warranty, including
implied warranties of merchantability and fitness for a particular purpose. S&B also
disclaims any liability for incidental or consequential damages including but not limited
to, repair labor, rental vehicles, hotel costs or any other inconvenience costs. This
warranty is in lieu of all other warranties or guarantees, either expressed or implied,
and shall not extend to any consumer or to any person other than the original purchaser
residing within the boundaries of the continental U.S. or Canada.
Warranty does not cover conditions where heat-damage resulted due to overly-rich fueling conditions.
Additional Warranty Conditions & Warnings Specific to S&B Intake Elbows
The warranty period for S&B Intake Elbows is 5-Years. Returns are
not accepted once the parts have been installed.
Although tests conducted by an independent third party found that the Intake Elbow
(part # 1001) did not rupture until reaching 160 PSI under ambient conditions, S&B does not
recommend nor does the warranty cover conditions where the Intake Elbow is exposed to
internal pressure in excess of 50 pounds per square inch (PSI). Visit
www.sbfilters.com
for actual burst test results. Exposing the Intake Elbow to pressures in excess of 50 PSI could
cause the Intake Elbow to leak and/or rupture causing severe damage to your vehicle and/or
serious bodily harm including death. Never allow more than 5 PSI to build in an Intake Elbow
with your hood raised. Special care should be taken when running a vehicle on a dyno to protect
all personnel from flying debris in the event of a rupture of the part.
Procedure for Returns
Please call (800) 358-2639 for obtain a Return Material Authorization (RMA) for all returns.
In preparation of your parts for shipment, please write the RMA number on the outside
of the box in large letters and be sure to include a copy of the original invoice in the package.
Package your parts carefully as S&B is not responsible for products
that are damaged during shipment back to S&B.
Return the package(s) with the freight prepaid to:
S&B Filters
Product Returns Dept.
787 S. Wanamaker Avenue
Ontario, California 91761
My
Account / Order Status
